Robotic Technique Improves Training In Hip Surgery

Main Category: Medical Devices
Also Included In: Bones / Orthopaedics;  Conferences;  Medical Students / Training
Article Date: 08 Feb 2008 - 4:00 PDT

email to a friend   printer friendly   view / write opinions   rate article

Delegates at the British Society for Computer Aided Orthopaedic Surgery Conference will hear that results from a pilot study saw graduates 95 per cent more confident using this robotic technique than when using conventional surgical methods in training.

Professor Justin Cobb, Head of the Biosurgery and Surgical Technology Group at Imperial College London, conducted the trial on 32 undergraduate medical students at Imperial College London from December 2006 to December 2007. The pilot study tested whether planning before an operation, combined with the latest robotic navigation equipment could increase the success rates of students practising hip resurfacing arthroplasty procedures - a method for correcting painful hip bone deformities by coating the femoral head with a cast of chrome alloy.

Up to 5,000 hip resurfacing operations happen each year. These operations are technically demanding and require precision and accuracy. Surgeons rely on years of experience and on different cameras, lasers and hand held tools to help them navigate during an operation.

Inexperienced surgeons often face a steep learning curve to gain the experience necessary to carry out hip resurfacing operations. Until now, this has only been gained through repeatedly performing the operations. This can cause problems because if hip bones are repaired incorrectly wear and tear occurs, requiring patients to undergo further painful and expensive corrective operations. Imperial researchers believe their method will address the issue at the undergraduate level.

Third year medical undergraduates were asked to trial a state-of-the-art robot called the Navigation Wayfinder - a new navigation tool never before used in the UK.

The Wayfinder is similar to a GPS tracking system. It helps the user to navigate during surgery by plotting correct surgical incisions. It also calculates the correct angles for inserting chrome alloy parts needed to repair hip bones.

It has twin digital arms protruding from a console. One senses the movement of surgical tools as they slice through a patient's hip area. The other takes detailed images of the bones. This information is fed into software which generates a virtual model of a patient's hip as it is being operated on. Similar to a 3D roadmap, it allows the user to plot the progress of an operation as they are performing it - a vital technique for ensuring that it is being carried out correctly.

Professor Cobb saw the benefits of incorporating the Wayfinder into undergraduate training and developed a three step training programme.

Students used model replicas of deformed hip bones for the trial, scanned by the Wayfinder's digital arm. This information was used to create a 3D virtual model of the bone area.

The Wayfinder's computer programme developed an operation plan setting out the actions required for undergraduates to correct the hip deformity.

Students were asked to carry out a virtual operation on the 3D model of the hip. Using the tool tracking arm, they practised techniques for fastening chrome alloy on virtual deformed hip bones. This built up their confidence, technique and skill.

They were asked to perform surgery on model casts of real hip bones. By using the Wayfinder to help them navigate, undergraduates were able to attach a post to the centre of the femoral head and thread it, via a guide wire, to the femur.

Professor Cobb then asked students to perform the same operation using conventional navigation tools. One method involved the use of jigs and alignments. Similar to geometry sets, they are metal surgical guides which helped undergraduates to manually align the femoral head as they attached it to the femur.

The second method required students to operate using an optical navigation device. A camera and pinpoint lights were used to create an image of the hip on a computer screen. This was used by undergraduates for visual navigation during the procedure.

Professor Cobb compared how undergraduates performed with each different method. He found that they were three times more accurate and precise using the Wayfinder than if they used the two other conventional methods.

Clinical trials using the Wayfinder are currently being carried out at Warwick Hospital, Bath Hospital, Truro Hospital and the London Clinic. Professor Cobb believes his training method could be applied throughout the UK to improve outcomes for patients. He said:

"Our research proves that we can take untrained surgeons and make them an expert in a new technique rapidly. More importantly, we've also demonstrated that no patient has to be on an inexperienced surgeon's learning curve. This could significantly improve a patient's health and wellbeing and ensure they do not have to undergo repeat operations."

----------------------------
Article adapted by Medical News Today from original press release.
----------------------------

The British Society for Computer Aided Orthopaedic Surgery Conference is in progress at the Beardmore Conference Centre, Glasgow, from 7th to 9th February 2008. For further conference details go to: http://www.caosuk.org/.

Source: Colin Smith
Imperial College London